Door Motion Technologies

Visit Website Visit Website
Contact Contact
Location Portage, Michigan

Door Motion Technologies, Inc. was formed to manufacture and distribute door opening devices to improve accessibility for the disabled and elderly.

DuraSwing 4 door operatorDMT has been a supplier to the major residential elevator and lift manufacturers in the US and Canada for over a decade. Since 1996 thousands of businesses and residences in the US and Canada have become more accessible simply by retrofitting existing doors with one of our DuraSwing operators.

Products From Door Motion Technologies, Inc.:

Commercial Door Operators

DuraSwing™ 5 Full-Time Door Operator
The DuraSwing™ 5 is ideal for retrofit or new construction and automates all swing doors up to 4.0 feet wide. It is a header-mounted system, intended for high-traffic, full-time applications. However, the system can be configured for on-demand operation as well.

  • The DuraSwing™ 5 includes a hydraulic closing mechanism which allows it to work as an automatic door closer when the power is turned OFF. This operator is tested to exceed one million full-load open/close cycles. It includes three modular components and can be installed by a single person in an hour or less.
  • Choice of on-demand or automatic (full-time) operation
  • Rugged construction – system does not require a clutch system to protect the gear train
  • Rated at 4 CPM
  • Cast iron, multi-size hydraulic door closer with five adjustments
  • Non-handed – system converts from right- to left-hand configuration in 15 minutes or less
  • Push- or pull-open ready (request in-swing option)
  • No maintenance required
  • System includes exclusive SafeTek™ safety control program
  • No external safety devices required
  • Sensor and access control ready
  • Quiet, smooth and efficient operation
  • True microprocessor motor control
  • Hold-open and operator shut-off switches are standard
  • Available in standard and custom powder coated finishes
  • Wireless operation standard (built-in)
  • CSA / NRTL listed
  • Meets all ADA / ANSI 156.19 code requirements
  • Two year limited warranty

DuraSwing™ 4 On-Demand Door Operator
This swing door operator is also ideal for retrofit or new construction. It automates all exterior or interior swing doors up to 4.0 feet wide, including plate-glass frameless doors. The DuraSwing™ 4 is a jamb-mounted system that works with existing closers. The actuator arm does not connect to the door. It is subject to wear-and-tear only when activated.

This is truly an on-demand system that adds no resistance to normal door operation. Like the DuraSwing™ 5, this model is tested to one million cycles and is quite easy to install.

The DuraSwing™ 4 can be weatherized with our WPK for outdoor use.

Residential Door Operator

DuraSwing™ 4R On-Demand Door Operator

This model is ideal for interior and exterior doors up to 4 feet wide that latch when closed. It can operate in either an in-swing or out-swing configuration.

The DuraSwing™ 4R unlocks, power opens, holds open, power closes and re-locks the door. This header-mounted system consists of three modular components for easy installation and service.

The DuraSwing™ 4R comes standard with a wireless receiver, providing the capability to operate the door with a variety of hand-held remote transmitters. Up to four separate openers can be controlled by the remote. For example, the remote for a typical residential installation might operate the garage door, front door, plus two other doors.

Typical DuraSwing™ 4R kit components are shown in blue (right).

Unlike other residential door operators, the DuraSwing™ 4 can be weatherized with our WPK for outdoor use.

Related Posts: